Siddhapura Machine Tools



All Geared Lathe Machine


All Geared Lathe Machine

The All Geared Lathe Machine which we provide is made up of 25 Grade Cast Iron and is hardened up to 400 BHN hardness; it is stringently checked for quality. Provided as time saver equipment with separate thread & feed Shaft. All Geared Shaping Lathe Machine is equipped with feed & thread gears could be changed rapidly and decreases the wear and tear of half nut and Lead screw. We have become due to our out of the world machines and their fine features the one of the premium Special Purpose Lathe Machines Exporters in India.



Technical Specification

Particulars AHD-1 AHD-2 AHD-3 AHD-4 AHD-5 AHD-6 AHD-7
Bed Length mm / feet 1670 / 5.5 2130 / 7 2740 / 9 3040 / 10 3650 / 12 4260 / 14 4870 / 16
Admit Between centre mm 535 990 1600 1900 2500 3125 3725
Spindle Motor Power HP / kw 2 / 1.5 2 / 1.5 2 / 1.5 3 / 2.25 3 / 2.25 5 / 3.75 5 / 3.75
Bed width mm / Inch 323 / 12.75 323 / 12.75 323 / 12.75 323 / 12.75 323 / 12.75 323 / 12.75 323 / 12.75
Height of center mm / Inch 254 / 10 254 / 10 254 / 10 254 / 10 254 / 10 254 / 10 254 / 10
Swing over bed mm 480 480 480 480 480 480 480
Swing over cross slide mm 280 280 280 280 280 280 280
Swing over gap mm 785 785 785 785 785 785 785
Spindle Bore mm / Inch 54 / 2.125 54 / 2.125 54 / 2.125 54 / 2.125 54 / 2.125 54 / 2.125 54 / 2.125
Spindle speed RPM 40 to 1060 40 to 1060 40 to 1060 40 to 1060 40 to 1060 40 to 1060 40 to 1060
*Also Available Model of Height Center of 300mm & 375mm.

Standard Equipments
  • Reducing Sleeve
  • Dead Centres
  • Square Tool Post
  • Thread Dial Inch
  • Motor Rails & V Pulley
  • V-Belt

Extra Accessories
  • Steady & Follow Rest
  • Carrier & Face Plate
  • True & Dog Chuck
  • Motor & Electric Fitting
  • Quick Change Tool Post
  • Coolant Pump & Fitting
  • Rear Tool Post
  • Taper Turning Attach
  • Chuck Plate